Memoirs of an Isekai in Naruto

Chapter 6: Log 6: Boil Release?



Log six: Boil Release?

Ok, kids I completely forgot that the boil release was a Kekie Jenki. To be honest, even after all these years I still have a hard time seeing chakra as five elemental types but see the dangerous application of physics and chemistry as true weapons.

For instance, when I think of ice I can just imagine cooling down water but you can't do that here without using an affinity to wind nature in one's Yang energy. Not only that but both of the Yang affinities must not be separate but mixed to have an ice yang affinity before they can produce ice release. 

For a sudo Ice release, requires the creation of water through the use of wind to apply convection cooling. Sudo steam release involves the creation of water through the use of fire to apply conduction. However, from what I could find, it is nearly impossible to create two different nature changes simultaneously to change a nature's expression with another nature without the use of a Kekie Jenki. You will need the help of a second body either a second person or a clone.

 I could only find two examples out of every ninja. One is Onoki who has an extreme mastery in earth release with at least 80 years of training in lava release, the combination of fire, and earth release, and dust release, the combination of earth, wind, and fire release. This is over a decade more of training than Hiruzen Sarutobi AKA our Hokage The Professor or "God of Shinobi". Hiruzen Sarutobi had such a mastery that he learned to use every chakra nature and was shown to have studied medical ninjutsu and sealing.

This means that Onoki used all that extra time to train some form of earth release making it instinctual Onoki needed no sign to cast this Jutsus while fighting. It wasn't until he was weakened and old in his 100s that he required a hand sign to cast his more advanced techniques like Hiruzen Sarutobi was forced to do in his late 60s. 

The second case was Sasuke Uchiha which used a fusion attack flame control and chidori. I am unsure if this is classified as a self-created Kekie Jenki, Sasuke Uchiha at this time had both Fuumetsu Mangekyou Sharingan and the Rinnegan. These eyes are seen as god-like. Kakashi, the Copycat Ninja, could get his name just by using a basic three-tomoe Sharingan.

So there are only two examples of people using two releases and one required an inhuman level of manipulation of one nature release and the other was basically biologically optimised for chakra manipulation. The closest most will ever get to this level of control are cases like fog release can control a Kekie Jenki like the steam from boil release but not produce it alone. From my reading, this is the advanced form of the mono natures of water release and wind release.

It is mentioned that fog release can control other forms of gaseous substances like clouds, fog, mist, steam, and smoke by injecting fog-release chakra into them through the air. There are a few definitions of fog but the closest I can see to what is shown is that fog is suspended droplets of water in an atmosphere.

Back to the topic at hand. I am sorry about this kids. I can give you ideas on how you can use multiple shadow clones working together with nature releases to mimic the use of creating Kekie Jenki through the use of combination attacks. 

Originally I was thinking you could control the temperature and pressure of water with water release and only after water reached certain points would one lose the ability to manipulate it but still be able to create it. but upon reflecting temperature is controlled via Kekie Jenki. 

Good thing I make notes before I write in this notebook, otherwise I would have ripped quite a few pages out due to how many times I had to reflect and rewrite about this topic. Now that my original idea is cooked I mean my original idea won't work out I will explain a bit of the properties of water and how you can create and use basic sudo Kekie Jenki style Jutsu with the help of shadow clones. 

Wait now that I mention it, you can give one of these techniques and training processes to the village once you master it for learning shadow clone jutsu and you can put it into one of the empty logs I leave open for it.

The physical properties of water.

Water in different phases has different heat capacities, water freezing and melting (sublimation and deposition) have the same temperature and heat capacity just like condensation and evaporation. 

Liquid water needs to be between a specific temperature and pressure. There is a point where water is three different phases simultaneously known as the triple point; it was 0.06 Earth's Atmosphere and 0.01 degrees Celsius. I will draw the chart below for an example when I need to explain why certain pressure and temperature requirements.

An interesting thing about liquid water and pressure is that water is incompressible. Unlike air where if you put force on it you can shrink its volume, what increases pressure water is the force applied to it. If I put water in a box and push down on the lid with 50 pounds the lid won't go down at all but the water is now pressurized pushing against the wall by those 50 pounds. Liquid water when it turns to steam expands 1,600 times in volume. If you compress this gas it will condensate and turn back into liquid even if it is past pointing.

Training sudo ice release can be used on any water release

Flowing water can't freeze as the motion is energy. If you can pressurize a ball of water surrounded by a shell of winds that uses convection cooling to super cool the water below freezing. You can then propel this water at your enemies where the outer shell will quickly expand turning to snow before the ball pressure equalizes with the atmosphere. If you can drench your enemies this water will freeze around their whole body. 

This sudo ice can be expanded upon with any water Jutsus if you want to increase it lethality but there are dimensioning effects to this as having more ninjas fighting you enemies instead of working in one still is optimal. The best Jutsu to use this on is the water prison Jutsu, the increased water pressure makes getting out harder and the cold water causes faster use of stamina. 

Training Sudo Boil Release vs. real Boil Release

Real Boil Release, can control a steam which they can control the PH of. This means that they can control how much OH or H is in the gas to affect its acidity or basicity. It hard to find out much else about it. I suspect a master could increase the pressure of the boiling water to keep it in a liquid form and be capable of controlling liquid water at boiling or greater temperatures. Only the surface of the technique where one likely has less control is likely to turn to steam which looks like the liquid water to be at the temperature of boiling water where this Kekie Jenki gets its name otherwise they would have named it steam release.

This is useful to know as you can create a new style of Jutsu with is information just like the wind with Vacuum Jutsu or sudo snow. For example, the water bullet Jutsu instead of creating a jutsu from the core outward creates this jutsu from the outside inward using the inward force of water to pressurize boiling water heated by another clone's fire release due to conduction heating. You can manipulate this water shell and launch it outward at the enemy. Once the water loses pressure and starts spreading out into the air as a mist the core of boiling water will start to expand. the cloud of quickly expanding steam and boiling water superheats the outer coating of depressurizing aerosolizing water to create a steam explosion.

Understanding Fog release

Most fog or mist is made due to high pressure in the atmosphere leading to cold air to move in and cool and condense tiny droplets of water suspended in the air. Low pressure may cause moist air to move in to help create humid conditions for fog/mist but the main cause is the cooling air due to high pressure. High pressure cools the air by causing it to sink compress and warm up. I only remember this due to my science classes when working on my intergraded science degree so my memory may not be perfect as it's been 25 years. 

I advise mastering Sudo boil release and using close to create pockets of steam in your area and steam expands at such a large volume it makes any fog release far more powerful. Also training in controlling sudo water Kekie Jenki style will increase your ability to control the pressure and temperature of the water which is important if you want to control the water in the atmosphere.

Best Training I can think of for mastering water release and sudo Kekie Jenki.

Learning to control the temperature and pressure of water Jutus is reaching the triple point of 0.06 Atms and 0.01 degrees Celcius. This will cause the water to constantly fluctuate between solid, liquid, and gas states. Increasing water pressure is easy as you do so when shaping water and creating water. What's control is reducing pressure on the water whether you start with a vacuum chamber or not is up to you and what chakra is capable of. Next is learning to shape wind and fire chakra with water to control the state of water you might lose control of the water but as the pressure and temperature will want to rise due to entropy you will have a lot of practice on manipulating the water as it keeps slipping your grasp as it constantly turns to gas and ice. 

You can create a chakra dome around a sphere and have multiple clones around the sphere each controlling one element it gives you practice in shaping and creating a vacuum chamber which will be great training if you want to learn wind vacuum techniques that I will write about in future logs.

Footing:

What came before chakra? This is an interesting dilemma. I will have to look at a few history books and use a lot of supination so take the next log with quite a few grains of salt.


Tip: You can use left, right, A and D keyboard keys to browse between chapters.